|
|
Porter Cable & Flex Polishing Pads & Porter Cable & Flex Buffing Pads & Brushes
The Porter Cable & Flex Polishing Pads and Porter Cable & Flex Buffing Pads including the Edge 2000 6" Double-Sided Pads are allways in stock at Detail King! These foam buffing pads are for the Porter Cable Polisher & Porter Cable 7424 XP Dual Action Orbital Polisher & Flex XC3401VRG (note: double sided pads are only for the Porter Cable). Just flip the pad to the opposite side if you don't have time to clean it or when the opposite side wears out. These revolutionary foam buffing pads will save you money, virtually reduces vibration and eliminates potential damage while polishing in tight areas. You can eliminate your velcro backing plate by using our Edge Porter Cable Pad Adapter.
Save time on every task! Change pads in a few seconds with patented snap-on, snap off Edge adapter. The adapter centers the pads perfectly every time. No tedious trial-and-error centering, and no tiresome, wasteful off-center buffing. Yellow & Green pads are made of Edge 2000 Durafoam. Durafoam is formulated for today's clearcoats. More aggressive at low speeds than standard foam, our Durafoam pads cut more efficiently. You get better more controllable abrasion with less elbow grease. Buff easier, with less risk of injury. Use the top of the double-sided Edge 2000 pad to buff under mirrors, bumpers and other surfaces. Eliminate up to 90% of your bending and kneeling to reduce fatigue and repetitive motion injuries.
We now carry the new Lake County CCS Smart Foam Pads. CCS stands for Collapsed Cell Structure. CCS Technology is Lake Country's innovative pad design that saves product by controlling product release onto the work surface. Dozens of dimples in the foam collect excess polish and reserve it until it is needed on the pad's face (the area that is in contact with the paint). This design prolongs your working time and reduces product waste.
Benefits Of CCS Technology:
Slows rate of polish absorption-As discussed above, the pads are slow to absorb products and therefore the paint benefits from a longer working time. The same is true of liquid waxes and sealants.
Improves operator control- CCS pockets gradually release polish as needed by the operator. Since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed.
Prevents pad skipping- CCS pockets reduce surface tension allowing the operator to run pad flat on a working surface. Basically, the CCS pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet.
Creates less heat- CCS pockets provide several points where the foam is not completely touching the paint. This reduces friction and therefore heat generated between the pad and the paint.
OEM approved- OEM tests confirm CCS pads out-perform convoluted pad designs.
CCS foam pads provide ample surface contact to effectively work the paint. The CCS pockets are small so they don't affect the amount of foam continuously touching the paint during operation.
|
